除铁机的检修程序

永磁除铁机是对原料中铁性杂质进行去除的磁选设备，而它也是由金属零件组成的设备，只要使用，时间长了都会出现故障或需要维护保养，要定期进行检修，以保证除铁机的正常运作，保证除铁机的除铁效果，作为一家专业的，负责的除铁机生产制造商，有必要为用户介绍下永磁除铁机的检修程序，以确保用户安全，规范地完成设备的检修。

Permanent magnetic iron removing machine is the removal of the magnetic separation equipment for raw material of iron impurities, and it is made of metal parts of the equipment, as long as the use of a long time, there will be a failure or maintenance, regular maintenance, to ensure the normal operation of the machine in addition to iron, ensure the effect of removing iron iron removing machine, as a professional manufacturer, in addition to iron machine, it is necessary for the user to introduce permanent magnet in iron machine maintenance procedure, to ensure the safety of users, to complete standard equipment maintenance.

1.检修前首先要通知调度室，待带式输送机物料运行停车后，方可进行除铁设备的检修工作。

1 overhaul before the first notice to the dispatch room, after the belt conveyor to stop the operation of materials, before the removal of iron equipment repair work.

2. 待带式输送机停下后，将带式输送机头操作箱“就地”、“集空”主令开关打到“停车”位置，并挂“停车牌”，以防不知情人士开机运作，造成危害。

2 to stop the belt conveyor, the belt conveyor head operation box "in place", "empty" master switch to "stop" position and hang "parking card", to prevent insider boot operation, harm.

3.在永磁除铁机控制柜上给除铁设备停电，并在操作按钮上挂“有人工作禁止合闸”的停电告示牌。

3 in the permanent magnet iron removing machine control cabinet for iron removal equipment power, and on the operation button hanging on "people work f no switching power outage signs.

4. 检修完成后将除铁机上落下的铁器全部清理干净，恢复除铁机送电，摘除机头操作箱“停电牌”将主令开关打到“集控”就地力位置通知调度恢复生产。

4 maintenance after the completion of the iron removing machine of falling iron all clean, in addition to restore power transmission iron removal machine, machine operation box "Blackout" brand R and the master switch to "control" is shown productivity position notice to resume production scheduling.

以上介绍的是永磁除铁机日常使用中进行检修的程序，希望对您有所帮助。

The above is the permanent magnet iron removal machine used in daily maintenance procedures, I hope to help you.